BPTCF - 65249, VSI CIRCULATING OIL 32

  • MSDS: BPTCF
  • Manufacturer: SHELL OIL CO
  • Product Name: 65249, VSI CIRCULATING OIL 32
  • National Stock Number: 9150-00N033327
Product Identification

Product ID:65249, VSI CIRCULATING OIL 32
MSDS Date:04/15/1991
FSC:9150
NIIN:00N033327
MSDS Number: BPTCF

Responsible Party
SHELL OIL CO
HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461;800-424-9300(CHEMTREC)

Info Phone: 713-241-4819

Preparer: G.A. VAN GELDER

Cage: SHELO

Contractor
SHELL OIL COMPANY
4320 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

Ingredients

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED (SEVERE)

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: 99.5%

OSHA PEL 5 MG/M3 MIST (MFR)

ACGIH TLV: 5 MG/M3 MIST (MFR)


MINOR ADDITIVES

Fraction By Weight: 0.5%


IN GEN, EMESIS

RTECS: 9999999ZZ


IE OILS & GREASES.

RTECS: 9999999ZZ


VESSELS. SOAK UP RESIDUE W/AN ABSORB SUCH AS

RTECS: 9999999ZZ


AREA WITH WATER TO REMOVE TRACE RESIDUE. SMALL

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE:BASED ON COMPONENT INFO, PROD IS
PRESUMED TO BE PRACTICALLY NON-IRRIT TO EYES. SKIN CNTCT:BASED ON
COMPONENT INFO, PROD IS PRESUMED TO BE PRACTICALLY NON-IRRIT TO
SKIN. PRLNGD & RPTD CNTCT MAY RES ULT IN SKIN DISORDERS SUCH AS
DERM, OILACNE/FOLLICULITIS. ACCIDENTAL RELEASE UNDER HIGH PRESS
APPLIC(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:MAY RSLT IN INJECTION OF OIL INTO SKIN
CAUSING LOCAL NECROSIS. INHAL:INHAL OF VAP (GENERATED 2 HIGH TEMP
ONLY)/OIL MIST MAY CAUSE MILD IRRIT OF MUC MEMB OF UPPER RESP
TRACT. INGEST:BASED ON C OMPONENT INFO, PROD IS NO MORE THAN
SLIGHTLY TOX IF SWALLOWED. NECROSIS MAY BE EVIDENCED BY DELAYED
ONSET OF (SUPP DATA)
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

First Aid

First Aid:EYE:FLUSH EYES W/WATER. IF IRRIT OCCURS, GET MD ATTN.
SKIN:REMOVE CONTAM CLTHG/SHOES, WIPE EXCESS FROM SKIN. FLUSH SKIN
W/WATER. FOLLOW BY WASHING W/SOAP & WATER. IF IRRIT OCCURS, GET MD
ATTN. IF MATL IS INJECTED UNDER SKIN, GET MD ATTN PROMPTLY TO PREV
SERIOUS DAM; DO NOT WAIT FOR SYMP TO DEVELOP. INHAL:REMOVE VICTIM
TO FRESH AIR & PROVIDE O*2 IF BRTHG IS DFCLT. GET MD ATTN.
INGEST:DO (SUPP DATA)

Fire Fighting

Flash Point Method:PMCC
Flash Point:360F,182C
Extinguishing Media:USE H*2O FOG, FOAM, DRY CHEM/CO*2. DO NOT USE
DIRECT STREAM OF H*2O. PROD WILL FLOAT & CAN BE REIGNITED ON SURF
OF H*2O.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . MATL WILL NOT BURN UNLESS PREHEATED. COOL
FIRE EXPOSED CNTNRS WITH WATER.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNIT. USE
CAUTIOUS JUDGEMENT WHEN CLEANING UP LG SPILLS. LG SPILLS:WEAR RESP
& PROT CLTHG AS APPROP. SHUT OFF SOURCE OF LEAK IF SAFE TO DO SO.
DIKE & CONTAIN. REMOVE W/V ACCUM TRUCKS/PUMP TO STOR/SALVAGE (ING
5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:MIN SKIN CNTCT. LAUNDER CONTAMINATED
CLOTHING BEFORE REUSE. STORE IN A COOL, DRY PLACE WITH ADEQUATE
VENTILATION.
Other Precautions:KEEP AWAY FROM OPEN FLAMES AND HIGH TEMPERATURES.

Exposure Controls

Respiratory Protection:IF EXPOS MAY/DOES EXCEED OCCUPATIONAL EXPOS
LIMITS (SEC. IV) USE A NIOSH/MSHA APPROVED RESP TO PREV OVEREXPOS.
IN ACCORD W/29 CFR 1910.134 USE EITHER AN ATMOSHERE-SUPPLYING RESP
OR AN AIR-PURIFYING RE SP FOR ORGANIC VAPORS AND PARTICULATES.
Ventilation:ADEQUATE VENTILATION.
Protective Gloves:NITRILE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH WITH SOAP & WATER BEFORE EATING, DRINKING,
SMOKING OR USING TOLIET FACILITIES. LAUNDER CONTAM CLTHG BEFORE
REUSE.
Supplemental Safety and Health
HAZ DECOMP PROD:PARTICULATES/GASES WILL EVOLVE WHEN MATL UNDERGOES
PYROLYSIS/COMBUST. CO & OTHER UNIDENTIFIED ORG CMPDS MAY BE FORMED
UPON COMBUST. EFTS OF OVEREXP:PAIN & TISS DAM FEW HOURS FOLLOWING
HIGH PRESS INJECTION. FIRST AID:NOT INDUCE VOM. IN GEN, NO TRTMT
NEC UNLESS LG QTY OF PROD ARE INGESTED. HOWEVER,(ING 3)

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:0F,-18C
Spec Gravity:0.8713 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER OIL, SLIGHT HYDROCARBON ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES.
Hazardous Decomposition Products:THERMAL DECOMP PROD ARE HIGHLY
DEPENDENT ON COMBUST CNDTNS. COMPLEX MIXTURE OF AIRBORNE SOLID,
LIQ, (SUPP DATA)

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.